EE-120A-1S Монофазен еталон за енергия клас 0.1 и източник на ток до 120А

Single-Phase Current Load with Energy Standard Class 0.1

Application and brief description

The EE-120A-1S unit consists of a single-phase energy standard class 0.1 and current load up to 120A.
The unit performs testing of all types single-phase electricity meters using the voltage of the site.
The meter error can be measured for active, reactive or apparent energy, in Manual Mode or with predefined Test Plans using the keyboard and the LCD display on the panel. Register Test,
Starting Current Test and No Load Test can be performed too.
The energy standard of the system can be used without the phantom load to test meters with customer load and perform analysis of the site – with direct measurement or with optional current clamps.
The analysis includes drawing of waveforms, harmonic analysis and display of numerical values of power,
power factor, voltage, current, phase shift, THD and frequency of the site.
The test results of 100 test sites are stored in a non-volatile memory. All these files can be transferred to a PC via USB port or viewed on the display of the unit.
All meter and analysis tests can be performed by a PC via EE software.

Advantages

Compact, light weight, user friendly menu
Full control from the keyboard and LCD display on the panel, or from a PC via USB
Automatic meter error measurements, using predefined Test Plans

Powerful software with MySQL database
Option – Control via RS232 of EE-300V-1 – a Single-Phase Voltage Generator, creating an independent
Test System for laboratory or on-site measurement of single-phase electricity meters

Functions and screens

PC Screens Control from a PC via USB and LCD Panel Screens Control by the panel keys

Analysis – table with display of V, I, φ, P, Q, S, cosφ, THD and f information

Harmonic analysis of the voltage and current wave forms (up to 39^th harmonic)

Wave form display of voltage and current

Manual test of electricity meters – Wh, VARh, VAh; Error Measurement, Register Test, Starting Current Test, No Load Test, Maximum Demand Test

Automatic meter error test with predefined Test Plans

Technical data

General

Power Supply	85 … 265VAC, 47 … 63Hz (Overvoltage protection up to 500VAC)
Power Consumption	max 150VA
Dimensions WxDxH	400x320x175mm
Weight	9.2kg
Housing	Rugged plastic case
Operation Temperature Range	-10°C … +50°C
Storage Temp.	-15°C … +65°C
Relative Humidity	< 95% non condensing
Safety Tests	IEC61010-1-2002, IEC61010-4-2002
Over-voltage Category	300V Cat. IV
Degree of Protection	IP-30 (opened), IP-65 (closed)
Declaration of Conformity	CE Conform

Single-Phase Current Load

Current Range	0.001A … 120.000A
Phase Shift	0.00° … 359.99°
Output Power	60VA
Accuracy	±0.1 % (10mA … 120A)
Harmonic Distortion	< 0.8 % (10mA … 120A)
Frequency Synchronization	45Hz … 65Hz

Single-Phase Standard

Measuring Quantities	Volts, Amps, Phase Shift, P, Q, S, Wh, VARh, VAh, PF, Frequency
Isolated Pulse Inputs	Scanning Head, Manual Button, KYZ, BNC High Frequency Input (Vcc = 12V, f ≤ 3MHz, I ≤ 0.1A)
Isolated Pulse Output	Programmable: 5 000 000 or 500 000 or 50 000 imp/kWh (Level 4 … 24V)
Flash Memory	100 tests reviewable on the LCD display

Standard Measurement Accuracy

Quantity	Range	Error
Voltage	30.00 … 500.00VAC	≤ ±0.05 %
	5 … 30VAC	≤ ±0.05 % *
Current (direct)	12mA … 120A	≤ ±0.05 %
	1mA … 11.9mA	≤ ±0.05 % *
Current (120A CC)	100mA … 120A	≤ ±0.2 %
	10mA … 99.9mA	≤ ±0.2 % *
Wh / VArh / VAh (direct)	12mA … 120A	≤ ±0.1 %
Wh / VArh / VAh (120A CC)	100mA … 120A	≤ ±0.2 % **
Phase shift	0.00° … 359.99°	≤ ±0.015°
Power Factor	-1.000 … +1.000	0.001
Frequency	40Hz … 70Hz	0.01Hz
Temperature coefficient (V, A, VA)	-10°C … 50°C	≤ 20ppm/K
Temperature coefficient (W, VAr)	-10°C … 50°C	≤ 30ppm/K

* Error related to the maximum value of the range

** Error related to apparent energy (to be divided by the power factor)